STROMAB CT600 MATRIX Automatic Push Feed Angle Crosscut Saw

STROMAB | CT600 MATRIX AUTOMATIC PUSH FEED ANGLE CROSSCUT SAW

If you need precision straight and angle crosscutting, it’s time to consider CT600 Matrix.

The Stromab CT600 MATRIX stands as a pinnacle of precision cut-off saws, featuring an innovative electronic push feed system with precise axis control with a rotating blade, which has a remarkable range of +/- 70°. This cutting-edge machine seamlessly marries the dependability of a pneumatic angle cut-off saw with an upward-moving blade, an advanced electronic push feed system, and an impeccably accurate rack and pinion guide system. The saw boasts an impressive array of six optimization options: Maximum length, Sequence, Board sequence, Volume, Minimum waste, and Priority. This ensures flexibility and adaptability for various cutting scenarios, maximizing productivity and material utilization. The motor system contains a brushless motor and a planetary reduction unit as well as a precision encoder for unparalleled accuracy. Since its debut, the CT600 MATRIX has surpassed all expectations by reaching unprecedented levels of performance, making it a continuous game-changer in the wood industry

Why Stromab CT600 MATRIX?

Rotation blade capacity of +/- 70°
High speed cutting cycle for maximum throughput
Powerful 10HP main saw motor for effortless capacity cutting
Precision pusher driven by high speed rack & pinion system
Equipped with a 12” BECKHOFF CP62XX touch-screen controller, with USB, Ethernet ports, and a WINDOWS operating software system
Ample storage capacity, accommodating up to 10,000 cutting lists with the ability to load and save machine parameters via USB
Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning
Four loading capacity length options: 10’, 13’, 16’, and 20 foot
Various outfeed systems are available from flat tables to automatic sorting kickers
Two versions available, “OPTI” and “OPTI PLUS”, each offering integrated solutions to cater to diverse needs

AVAILABLE VERSIONS

“OPTI”: Automatic Cutting Line with Total Optimization: The standard “OPTI” version provides an automatic measurement function for variable-length materials, whether loaded individually or in bundles, making it a perfect choice for those seeking optimal efficiency
“OPTI PLUS”: Automatic Cuttign Line with Total Optimization & Defect Cutting: For advanced mark detection ensures complete optimization while eliminating knots and defects. The system marks the material with fluorescent chalk, enhancing precision and quality.

CUTTING CAPACITY

CUTTING CAPACITY POSITION (A) – max. height

	Metric	INCHES
0°	200 x 215 mm, 50 x 370 mm	7.9” x 8.5”, 2” x 14.6”
30°	200 x 185 mm, 50 x 325 mm	7.9” x 7.3”, 2” x 12.8”
45°	200 x 150 mm, 50 x 265 mm	7.9” x 5.9”, 2” x 10.4”
80°	200 x 35 mm, 50 x 63 mm	7.9” x 1.4”, 2” x 2.5”

CUTTING CAPACITY POSITION (B) – max. width

	Metric	INCHES
0°	160 x 315 mm, 40 x 410 mm	6.3” x 12.4”, 1.6” x 16.1”
30°	160 x 270 mm, 40 x 350 mm	6.3” x 10.6”, 1.6” x 13.8”
45°	160 x 220 mm, 40 x 285 mm	6.3” x 8.7”, 1.6” x 11.2”
80°	160 x 52 mm, 40 x 70 mm	6.3” x 2.1”, 1.6” x 2.8”

SPECIFICATIONS

CUTTING UNIT TECHNICAL FEATURES
Infeed Length	3000~14,000 mm (10 ft ~ 46 ft)
Outfeed Length	1000 mm (3 ft)
Min. Workpiece Thickness	10 mm (0.39”)
Min. Workpiece Thickness (with Auto Loader)	20 mm (0.79”)
Working Table Tilted	8°
Motor Power	10 HP (7.5 Kw – 400V)
TCT Blade Dia.	600 mm (23 1/2”) F= 30 Z= 60 S= 5
Blade Speed	2575 RPM
Cutting Cycle Speed	4 seconds
Automatic Rotation of the Table	-70°, 0°, +70° (-80°, 0°, +80°)
Rotation Positioning Speed from 0° to 70°	1.3 seconds
Rotating Positioning Precision	+/- 0.2°
Vertical Hold-Down Cylinders	2 QTY.
Dust Extraction	4 x 100 mm (3.9”)
Motor Voltage	480/3/60 A=14.3
Horizontal Front Pressure Plates	2 QTY.
Push Feed System Technical Features
Positioning Precision	+/- 0.4°
Infeed Motor for Packet Weight	80 Kg (177 LBS)
Max. Push Feed System Speed	296 FPM

* 1: Vertical Twin Rod Slide Units
* 2: Horizontal Front Pressure Plates with Electronic Management
* 3: Gas Springs for Protection Lifting
* 4: Loading and saving machine parameters via USB port
* 5: N°1000 cutting lists are made up of 11 sizes or one list of 10,000 sizes in sequence, creating a graphic description of the workpiece

ADDITIONAL OPTIONS

Program customized by STROMAB that can generate cutting list on PC
Large 18” outfeed monitor
Table rotation +/- 80°
Vertical cylinders for stack cuts at 90°
Pneumatic clamp
- Pulling side clamp on right side
- Pulling side clamp on left side
Extended push-feed system
- Lengths from 6 ½ ft up to 46 ft longer (Price per meter)
Outfeed table extension
- From 6 ½ ft up to 20 ft in length (Price per additional meter)
Automatic Loader built to machine specs
Electronic trap door for trim and waste ejection after the saw line (Straight cuts only)
Extra TCT Widia blade Ø 500mm (20”)
Label printers – 3 options:
- Label printer (Basic) – direct heat
- Label printer – heat transfer on normal paper
- Label printer – heat transfer on polypropylene label
REA high-resolution ink-jet printer
- 1 vertical printing head with a print height of 1/2”
- 2 vertical printing heads with a print height of 1”
Electronic workpiece sorter with a belt and rapid kickers
Extended motorized belt of more than 10 ft (Price per additional meter)
Additional rapid kicker cylinder
Stacking idle roller table

Category: Automatic Cross-Cut Saws

Akhurst Machinery Group announces strategic partnership to aid North American housing crisis.

Corporate, Machinery Solutions

Akhurst Machinery Group, a prominent player in the North American machinery industry, is pleased to announce a strategic partnership with Modular Building Automation (MBA), a Dutch company specializing in machinery for prefabricated homes, modular buildings, and offsite construction solutions. MBA, a joint venture of the renowned companies J.J. Smith in the UK and Ireland and H&M headquartered in the Netherlands, is involved in the design, manufacturing, distribution, and worldwide sales of MBA equipment.

Akhurst Machinery Group announces strategic partnership with Stromab.

Corporate, Machinery Solutions

Akhurst Machinery Group, a prominent player in the machinery industry, proudly announces a strategic partnership with Stromab SPA, an Italian manufacturer of innovative crosscutting solutions. This collaboration signifies a major commitment by both companies to bring cutting-edge technology and comprehensive solutions to the North American market. Akhurst Machinery Group, the parent company behind the well-known brands of Cantek and Leadermac USA, will leverage Stromab SPA’s expertise in crosscutting solutions to enhance its offerings in North America.

Woodworking Technology Days 2023 is just around the corner.

Corporate, Machinery Solutions, Trade Shows

Visit us during this year’s Woodworking Technology Days and see the latest equipment solutions for your business.