Stop wasting talent at the end of your moulder.
Specially designed to handle the fast pace of end-to-end facing on Moulders, the Doucet MR Moulder Return Conveyor enables you to run your moulder with just one operator. The MR Return Conveyor is suitable for applications with a feed rate up to 80 feet per minute. Available in three models: MR-8, MR-12 and MR-16.
Why Doucet MR Moulder Return Conveyor?
- Single operator can run a moulder
- Material is automatically returned to the operator for stacking
- Models to suit material length up to 192” long
- Non marking PVC rollers
- Continuous transfer system does not require spacing between boards
KEY ADVANTAGES
- A pair of rollers, dariven by a variable speed motor, guides the boards exiting the moulder towards the receiving module
- Boards entering the receiving table are supported by an adjustable ledge in the continuation of the mouder’s fence
- Once the boards exit the feed rollers, they are released by gravity to transfer below the ledge. Then, side-shifted to the return rollers quickly and efficiently
- The return rollers, made of heavy PVC, are individually driven by welded urethane belts
- The transfer process occurs on a continuous basis, eliminating functional limitations typical of return devices with multiple “cycle” steps
- All models feature a 48″ wide receiving module and return rollers are 12″ wide; their length is proportionate to the length of your moulder
OPTIONS
Pre-milling for Edgebanders.
Machinery SolutionsMore often today you are finding features on smaller edge banders that initially were exclusive to larger, higher production machines. One of those features is pre-milling. Pre-milling consists of two counter-rotating cutterheads which are designed to mill the edge of the panel prior to applying the edge banding material.
Proper edgebander maintenance.
Machinery SolutionsEdgebanders are one of the more complex machines in operation in most cabinet and millwork shops. The maintenance however is imperative to the performance and reliability of the machine. Without it you can experience a poor edge quality which will result in hand finishing and defects and worst of all significant down time and expense […]