LEADERMAC
523C Short Stock Moulder with Feedmac 08 Random Length Feeder
FEATURES
- Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
- The pieces are advanced to a short stock feeder at the edge of the moulder ensuring pieces are advanced butt to butt, allowing down to 4” long pieces to be fed through the machine. With a grooved bed, and extra hold down/hold over pressure throughout the machine, the pieces can be advanced through the moulder successfully.
Specifications
Min. working width: |
20 mm / 3/4” |
Max. working width: |
230 mm/ 9” |
Min. working thickness: |
10 mm / .4” (thinner on request) |
Max. working thickness: |
150 mm / 5.9” |
Min. length of workpiece |
|
when feeded consecutively: |
100 mm / 4” |
Min. length of single work piece: |
800 mm / 31.4” |
(note: pieces cannot be square) |
|
1st bottom spindle: |
7.5 HP – 20 HP |
2nd right spindle: |
7.5 HP – 15 HP |
3rd left spindle: |
7.5 HP – 15 HP |
4th top spindle: |
10 HP – 25 HP |
5th last bottom spindle: |
10 HP – 25 HP |
Up & down motor: |
3/4 HP x 1 |
Feed motor: |
5 HP / inverter x 1 |
Spindle diameter: |
40 mm / 1-13/16 / 1-1/2 |
Spindle RPM: |
6,000 RPM (7,200 optional) |
Feed speed |
6 – 24 m/min / 20 – 80 FPM |