Precision industrial miter saw for cutting postformed countertops.
Evans Midwest CS Postforming Countertop Saws produce fast, accurate, precision miter cuts and draw bolt mortises when fabricating postformed kitchen countertops. One operator can produce a complete miter joint with draw bolt mortises in under three minutes. The Signature Cutting Station reduces handling and cutting cycle times, operator fatigue and product damage.
A great machine, backed by over 50 years of experience, Evans Midwest sets the industry standard for countertop saws, and continually improves our product design to achieve our number one priority, customer satisfaction. With so many available options, let us configure a saw for your operation!
Why Evans Midwest CS Postforming Countertop Saws?
- Three models to choose from depending on your cutting requirements
- Upper and lower frames are machined in a single setup
- Fixed stops at 22.5°, 45°, and 90° (RH & LH side) & pneumatic locking pin
- Pneumatic locking pin
- 5 HP saw motor with a heavy-duty arbor assembly
- Variable speed forward/reverse drive
- Router system includes four (4) router motors, guiding template, rotating template pin with ball bearing
- Two (2) pneumatic hold down clamps per side
- Heavy-duty rear fence
- Three (3) dust collection hookups
MODELS AVAILABLE
CS X Cutting Station
- Overall cutting length of 42.5” (1080mm) at 90o angle and 30” (760mm) at 45o cut angle
- Maximum backsplash height is 4.875” (124mm) from bottom of deck
- 16” (406 mm) saw blade and four (4) routers
CS XL Cutting Station
- Overall cutting length of 53.5” (1360mm) at 90o angle and 37.5” (950mm) at 45o cut angle
- Maximum backsplash height is 4.875” (124mm) from bottom of deck
- 16” (406 mm) saw blade and four (4) routers
CS XLT Cutting Station
- Overall cutting length of 50” (1290mm) at 90o angle and 36” (915mm) at 45o cut angle
- Maximum backsplash height is 6.875” (172mm) from bottom of deck
- 20” (508 mm) saw blade and four (4) router bits
OPTIONS
Dovetails, what’s the big deal?
Machinery SolutionsOnce you open the drawer and see the dovetail design, it elevates your product in the consumer’s eye. But why dovetail machine is right for my operation? When deciding to produce your own drawer boxes, a number of factors come into play when selecting the equipment required.
CNC Series: How does cutting speed affect your cutter life?
Machinery SolutionsIf you want to extend your cutter life, you need to produce an optimum chip load. And to achieve faster feed rates, you need to have axis servo drives large enough to move the machine’s mass at a rapid speed.
Kingswood Cabinets. A true commitment to growth.
Case Study, Machinery Solutions, Service and SupportAkhurst is very proud of our involvement in the plant expansion of Kingswood Cabinets of Calgary, Alberta. Kingswood recently relocated to a new state-of-the-art manufacturing facility.