Bi-Matic

Prima 7.3 Plus PNE/ONE Edgebander

Machine Information

Features
  • Especially designed for the applicant of PVC, veneer, ABS, melamine and solid wood strips form 0.4mm up to 3mm thickness
  • 5 litre glue pot with quick heat up time of 5~6 min
  • Screw glue roller delivers continuous and consistent glue no matter the height or length of the panel
  • Centrally located controls conveniently placed at the front of the machine
  • Touch screen control available in two configurations:
    • PNE = Pneumatic quick change of certain machine functions between two set edge banding thicknesses.
    • ONE = Programmable setting for certain machine functions when changing over between various edge banding thicknesses for fast change over times.
Working Units
  • PVC & ABS cut off device can cut coil tape up to 3mm
  • Pre-milling with counter rotating diamond cutterheads provides optimum edge surface quality prior to edgebanding
  • (2) motor end trim with high frequency motors
  • (2) motor top & bottom trimmers with high frequency motors with quick setting feature according to the thickness of the edge being applied
  • (1) motor high frequency corner rounding unit
  • PVC radius scraping unit can be activated pneumatically from the front control panel
  • Glue scraping unit for any glue residue remaining on the board surface for optimum surface quality
  • (2) buffing units for final edge preparation
Specifications
Edge thickness 0.4~3mm
Minimum panel length 80mm
Minimum panel length with rounding unit 130mm
Minimum panel width 100mm
Maximum panel thickness 50mm
Minimum panel thickness 10mm
Feed speed 9 m/min
Machine length 4150mm
Machine width 700mm