CARELL

SIHR Series Plate Rolls

Features

Planetary Swing Arm System (PSAS) for lateral roll movement combines durability and simplicity. Unique larger end bearings allow greater rake angles for cone rolling. Reduced maintenance and prolong machine life are valuable benefits. Our system eliminates additional jack cylinders, linkages, cams and pivot points that are commonly used by other brands.

Positive Parallelism System (PPS) fluid dynamic leveling on lateral rolls for instant & continuous parallelism uses no additional moving or mechanical parts for ease of operation and virtually zero maintenance Our 3 Roll Plate Rolls do not employ troublesome and maintenance prone torsion bar balancing systems.

Main Frame weldments are fabricated from heavy plate and are additionally reinforced at load points to efficiently distribute bending stresses and reduce torsional deflection. Main bed beams and drop end yokes are the largest and strongest in the industry. Just look and compare. All of these features reduce maintenance and extend the machine life.

Drive Trains are powered by high torque radial piston hydraulic motors and planetary speed reducers. All 3 rolls are driven for maximum traction and maximum efficiency.

Control Systems are designed for maximum operator safety and ergonomics. All machine functions are controlled from a mobile control console fitted with a detachable trailing lead.

Electrical Systems employ top rated switchgear mounted in NEMA style enclosures built to IEC standards. Control circuits are all 24VAC low voltage for safety and extended component life.

Hydraulic Systems are integral to the machines and incorporate larger roll thrust cylinders and larger displacement hydraulic motors than other brands. Larger components and lower operating pressures increase the systems life and dramatically reduce maintenance. All systems use pilot operated non-return valves and maximum pressure overload relief valves for constant positioning under extreme loads. All of this protects your investment.

Safety Systems include trip wire lines around machine, emergency stop palm buttons on control console and keyed switch control lockouts.

ALL Carell SIHR Rolls include a Cone Rolling Device & Extended Roll Shafts standard!

 

SPECIFICATIONS

SIH
Model
Size Prebending Rolling Max. Roll Diameters Power HP Weight LBS
3 x 1.2 x Top Lateral
6/3 6' 5/16" 1/4" 3/8" 7.80" 7.10" 7.5 7,920
8/3 6' 3/8" 5/16" 1/2" 8.66" 7.48" 7.5 8,580
10/3 6' 1/2" 3/8" 9/16" 9.84" 9" 10 11,000
12/3 6' 5/8" 1/2" 11/16" 11.00" 10.24" 15 l6,720
15/3 6' 3/4" 9/16" 7/8" 11.80" 11" 15 17,600
17/3 6' 7/8" 5/8" 1" 13" 12.20" 20 21,340
6/4 8 1/4" 3/16" 5/16" 7.80" 7.10" 7.5 8,800
8/4 8' 5/16" 1/4" 3/8" 8.66" 7.48" 7.5 9,900
10/4 8' 3/8" 5/16" 1/2" 9.84" 9.00" 10 12,100
12/4 8' 1/2" 3/8" 9/16" 11" 10.24" 15 18,480
15/4 8' 5/8" 1/2" 11/16" 11.80" 11" l5 19,800
17/4 8' 3/4" 9/16" 7/8" 13.00" 12.20" 20 23,760
6/5 10' 3/16" 1/8" 1/4" 7.80 7.10" 7.5 9,900
8/5 10' 1/4" 3/16" 5/16" 8.66" 7.48" 7.5 10,560
10/5 10' 5/16" 1/4" 3/8" 9.84" 9.00" 10 13,200
12/5 10' 3/8" 5/16" 1/2" 11" 10.24" 15 20,240
15/5 10' 1/2" 3/8" 9/16" 11.80" 11" 15 21,560
17/5 10' 5/8" 1/2" 3/4" 13.00" 12.20" 20 26,180
6/7 12' 11ga 14ga 1/8" 7.80" 7.10" 7.5 11,880
8/7 12' 8ga 1/8" 5/32" 8.66" 7.48" 7.5 12,540
10/7 12' 7/32" 8ga 1/4" 9.84" 9.00" 10 15,400
12/7 12' 1/4" 3/16" 5/16" 11" 10.24" 15 23,760
15/7 12' 5/16" 1/4" 3/8" 11.80" 11" 15 25,520
17/7 12' 7/16" 5/16" 1/2" 13.00" 12.20" 20 31,020
 

Images