CARELL

Q-Series 4 Roll Plate Rolls

Features

  • Top and Pinch rolls driven/powered by TEFC electric motor & reducer
  • Bending rolls powered up/down via precision worm drives, motorized
  • Pinch roll manual adjust via precision worm drives
  • Safety trip wires
  • Top roll drop end, manual
  • Top roll raising for easy part removal
  • CW/CCW rotation via push buttons on detached control stand w/ E-Stop

Note: Hardened rolls strongly suggested for stainless, carbon steels, cones and most applications

Model Size Capacity Roll Dia. HP Weight lbs.
Q412-104 3’ 9GA 4.33” 3.0 2,200
Q411-105 3’ 3/16” 4.52” 4.5 2,640
Q413-106 3’ 7/36” 5.12” 6.0 3,300
Q414-107 3’ 1/4" 5.91” 6.0 3,630
Q415-108 3’ 5/16” 6.70” 8.5 4,400
Q412-153 5’ 11GA 4.53” 3.0 2,640
Q411-154 5’ 9GA 4.72” 4.5 2,860
Q413-155 5’ 3/16” 5.12” 6.0 3,740
Q414-156 5’ 7/32” 5.91” 6.0 4,400
Q415-157 5’ ¼” 6.75” 8.5 4,950
Q412-202 6’ 14GA 4.53” 3.0 2,860
Q413-102 6’ 11GA 5.12” 6.0 4,180
Q414-204 6’ 9GA 5.91” 6.0 4,950
Q415-205 6’ 3/16” 6.70” 8.5 5,720
Q413-252 8’ 14GA 5.51” 6.0 5,280
Q414-253 8’ 10GA 6.30” 6.0 5,500
Q415-254 8’ 9GA 7.08” 8.5 7,040
Q413-301 10’ 20GA 5.51” 6.0 5,720
Q414-302 10’ 15GA 6.30” 6.0 6,490
Q415-303 10’ 12GA 7.48” 8.5 8,690

LED readout & memory preset both bending rolls

LED readout & memory preset on pinch roll

 

Custom options:

  • Special roll diameters, tapers and lengths
  • Grooved rollers or collars for flanged parts
  • Feed tables, shields and overhead supports
  • Polished or ground finish rolls
  • Foot pedals for CW/CCW roll rotation

Images