Reduce costly set up time on your edgebander.
The Bi-Matic Prima Plus 7.5 TWO is an automatic and programmable edgebander that allows you to store machine settings for instant recall. With DC servo controls for various functions on the machine setup time is reduced to seconds. Servo controls also mean accurate and repeatable results time after time. The multi-radius tooling provided optimum results on various edge thicknesses.
Why Bi-Matic Prima Plus 7.5 TWO Programmable Edgebander?
- Store settings for working units allowing for immediate recall and automatic setting according to the desired edge to be applied
- Greatly reduce machine setup time and spend more time edgebanding
- Quick change pot allows for the rapid changing between glue types or colors
- Screw glue roller system is capable of applying EVA or Polypropylene glue which has a lower viscosity for virtually invisible joints
- The full package for cabinet parts, cabinet doors, and more.
KEY FEATURES
- 12” touch screen control capable of storing machine settings
- Automatic machine adjustments to certain units by servo and pneumatic controls
- Auto setting infeed fence according to the edge thickness being applied
- Narrow part insertion device to ensure panels are fed squarely into the machine
- Dual telescopic panel support to properly support wider pieces during edgebanding operations
- 5 litre Teflon coated glue pot with quick heating time of 5-6 minutes
- Quick change system allows for fast exchange of the glue pot when using different color glues or different glues (when extra glue pot(s) are ordered
- Screw Glue Roller system allows for proper glue delivery of higher viscosity glues like Polypropylene resulting in virtually invisible glue joints
- Counter rotating diamond pre-milling cutters to ensure an optimum edge for higher quality joints
- Dual motor end trim with pneumatic inclination from the control system
- High frequency top & bottom edge trimming units with servo setting
- Multi radius cutters which can be set and programmed from the control panel
- Corner rounding unit for finishing the ends of the panel with pneumatic 2-position dual radius selection from the control panel.
- Radius scraping unit with multi radius knives
- Glue scraping system to remove any excess glue to eliminate any re-working of the panel
- Buffing unit to polish edges after machining
- Nesting rollers for proper machining of doors with hinge holes already process
- Riepe LPZ/II anti-adhesive spray system prior to pre-milling unit
- Riepe LP163/93 polishing system before buffing unit to promote a vibrant edge
SPECIFICATIONS
Pre-milling for Edgebanders.
Machinery SolutionsMore often today you are finding features on smaller edge banders that initially were exclusive to larger, higher production machines. One of those features is pre-milling. Pre-milling consists of two counter-rotating cutterheads which are designed to mill the edge of the panel prior to applying the edge banding material.
Proper edgebander maintenance.
Machinery SolutionsEdgebanders are one of the more complex machines in operation in most cabinet and millwork shops. The maintenance however is imperative to the performance and reliability of the machine. Without it you can experience a poor edge quality which will result in hand finishing and defects and worst of all significant down time and expense […]