The ZX-150 fingerjointer, the ultimate fingerjointing machine, a very-high production unit designed for non-structural as well as structural applications, for hard wood and soft wood.

The Doucet ZX-150 is a Double End Fingerjointer with lugs on 9″ or 12″ centers, a semi-automatic lug loader capable of feeding up to 150 pieces per minute, a fully automatic corner transfer, a pre-assembly tunnel and a 24 foot assembly press expandable in 4 foot increments, up to 40 feet.

The ZX-150 Fingerjointer includes:

• Semi-automatic Feed Conveyor, 24″ X 20′
• Fingerjointer shapers includes:
  • 2 Machining Stations, one left, one right
  • 10″ Scoring Saws on 5 HP Motors, 3400 RPM
  • 14″ Trim Saws on 7.5 HP Motors, 3400 RPM
  • Cutterheads on 25 HP Motors, 3400 RPM
  • Calibration readouts on saws and spindles
  • High precision ductile iron chain with automatic chain lubrication
  • Automatic transfer between machining stations
  • Apquip Glue Applicator
  • 25 HP feed motor with variable speed drive up to 120 FPM
• Automatic Corner Transfer with 1 HP motor
• Pre-assembly Tunnel, 15′ long
  • 2 side powered platen chains with 7.5 HP motor
  • 1 bottom powered platen chains with 5 HP motor
  • All motors for tunnel are linked to the same variable speed drive and automatically vary according to board flow
• Automatic Assembly Press, 16′ long
  • 5 HP motor on pressing wheels with variable speed drive
  • 14″ Undercut Saws on 5 HP Motors
  • 5 HP motor on side lug transfer chain toward the pressure cylinder
  • 5 HP power unit for pressure cylinder and top deflection holddown
• Control Panel with Omron programmable controller and production report