The ZX-100 fingerjointer, a medium to high production unit designed for non-structural applications, for hard wood and soft wood. The Doucet ZX-100 is a Double End Fingerjointer with lugs on 9″ or 12″ centers, a manual lug loading table, a manual corner transfer, a pre-assembly tunnel and a 16 foot assembly press expandable in increments of 4 feet up to 40 feet.

THE zx-100 fingerjointer includes:

• Semi-automatic Feed Conveyor, 24″ x 20′
• Fingerjointer shapers includes:
  • 2 Machining Stations, one left, one right
  • 10″ Scoring Saws on 3 HP motors, 3400 RPM
  • 14″ Trim Saws on 5 HP motors, 3400 RPM
  • Cutterheads on 20 HP motors, 3400 RPM
  • Automatic transfer between machining stations
  • Apquip Glue Applicator
  • 20 HP feed motor with variable speed drive up to 75 FPM
• Gravity Corner Transfer with wheels
• Pre-assembly Tunel, 15′ long
  • 2 side powered platen chains with 7.5 HP motor
  • 1 bottom powered platen chains with 5 HP motor
  • All motors for tunnel are linked to the same variable speed drive and automatically vary according to board flow
• Automatic Assembly Press, 16′ long
  • 5 HP motor on pressing wheels with variable speed drive
  • 14″ Undercut Saws on 5 HP Motors
  • 5 HP motor on side lug transfer chain toward the pressure cylinder
  • 5 HP power unit for pressure cylinder and top deflection holddown
• Control Panel with Omron programmable controller and production report