WATTS-MUELLER | W-LPSC SERIES MANUAL PIPE AND BEVELER MACHINES

Long straight pipe cutting and beveler machines.

The Watts-Mueller W-LPSC Series Manual Pipe and Beveler Machines ensure straight cuts by utilizing a rotory clamp to draw the pipe into an indexing roller to control pipe walk. If plasma cutting is used, the ground is completed by attaching the ground clamp to the end of the pipe and moving it to the next part to be cut after each cut. The system is designed with a hose & cable tray to accommodate the cable track. The carriage is manually positioned to the desired location and locked into place. The carriage floats on a roller ball standoff to maintain an accurate distance from the pipe surface.

Why Watts-Mueller W-LPSC Series Manual Pipe and Beveler Machines?

  • Designed with a hose & cable tray to accommodate the cable track
  • Carriage is manually positioned to desired location and locked into place
  • ensures straight cuts by utilizing a rotary clamp to draw the pipe into an indexing roller
  • 20 ft. length standard machines. Longer available

W-116 Manual Pipe Cutting-Beveling Machines
The W-116 LPSC is a pipe cutter capable of cutting and beveling from 1 1/2″ to 16″ diameter pipe up to 20′ long. (Additional lengths are available based on your needs). Complete with oxy fuel torch and magnetic valve manifold, with plasma interface and wiring to attach customer supplied plasma cutter and beveler. The torch is manually adjusted to the desired bevel angle. Includes 5 TR8 transfer rolls. This machine is perfect for cutting coupons, mitres and other cuts.

  • Diameter: 1-1/4″ – 16″
  • Length: 20 ft. standard (longer available)
  • Volts: 115 v
  • Amps: 4
  • Size: 3 X 20 ft.
  • Shipping wt: 1000 lb.
  • Up to 56 surface inches per minute rotation speed

W-132-LPSC Long Pipe Straight Cutter-Beveler
The W-132 LPSC is a pipe cutter capable of cutting from 3″ to 32″ diameter pipe up to 20′ long (optional lengths available based on what is needed). Complete with oxy fuel torch and magnetic valve manifold, with plasma interface and wiring to attach customer supplied plasma cutter. The torch is manually adjusted to the desired bevel angle. This machine includes 5 TR10 transfer rollers. Like the W-116, this machine is perfect for cutting coupons, mitres and other cuts.

  • Diameter: 3″ to 32″
  • Length: 20 ft. standard (longer available)
  • Volts: 115 v
  • Amps: 4
  • Size: 3 X 20 ft.
  • Shipping wt: 1200 lb.
  • Up to 140 surface inches per minute rotation speed