OSAMA | S4R/P 4-ROLL GLUE SPREADER

Production glue spreader for a wide range of panel products.

The Osama S4R/P 4-Roll Glue Spreader is a gluing machine for vinyl glue (PVAc), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, composite materials, plasterboards.  With this machine we can adjust the quantity of glue in a uniform and precise way, considering the grooving of the rollers, which should be suitable to the type of production.

The heavy structure and the core of the rollers, designed with increased thickness than previous models, enables to work hard without particular problems and allows to glue on materials with maximum width of 2200 mm. Replacement procedure of rollers for maintenance is simplified, with supports divided in half and “bayonet” coupling.

It is moreover possible to equip the machine with different accessories, like the electronic speed variator, the automatic washer for rollers and the automatic lifting of the upper roller with position shown on display.

The S4R/P is suitable to various types of production, even in construction sector and in the sponge and mattresses industry.

Why Osama S4R/P 4-Roll Glue Spreader?

  • (4) rollers driven by two independent motors
  • Available in working widths from 1300mm to 2200mm wide
  • Working thickness up to 100mm
  • Spreading is uniform and constant throughout the working width, thanks to a technological innovation and to special dampers compensating the differences of non calibrated panels.
  • Spreading rollers coated with a suitable layer of special “antiacid synthetic rubber” give the possibility to perform several grindings and therefore give a long life.
  • Micrometric batching of the glue to be applied obtained by means of covered with ebonite and ground rollers, controlled by an adjustable hand wheel.
  • Suitable protection devices for all moving parts guarantee the operator’s utmost safety.
  • Electrical system is fully sealed with control button pad, voltage 24 volts.
  • A wide range of options to choose from to suit your specific needs
S4R/P 2200
S4R/P 2000
S4R/P 1800
S4R/P 1600
S4R/P 1400
S4R/P 1300
Working width
2200mm
2000mm
1800mm
1600mm
1400mm
1300mm
Working height
0-100mm
0-100mm
0-100mm
0-100mm
0-100mm
0-100mm
Work surface height
890mm
890mm
890mm
890mm
890mm
890mm
Spreading roll diameter
250mm
250mm
250mm
250mm
250mm
250mm
Feed speed
22 m/min
22 m/min
22 m/min
22 m/min
22 m/min
22 m/min
Motor power
3 kW
3 kW
3 kW
1.5 kW
1.5 kW
1.5 kW

Category:
cnc vacuum

When it comes to vacuum, hold down a bigger pump is not necessarily the answer. More important is the design of the vacuum table and how efficient it is at holding small parts during machining operations.

CNC Blog Series - Weight

Producing with optimum cut quality, increased production, and superior cutter performance. Choosing the right solution for your shop involves research and understanding which match your production expectations and future goals.

Akhurst Machinery - Blog Post - Dovetail

Once you open the drawer and see the dovetail design, it elevates your product in the consumer’s eye. But why dovetail machine is right for my operation? When deciding to produce your own drawer boxes, a number of factors come into play when selecting the equipment required.