DOUCET | XPRS RETURN CONVEYOR

Low cost edgebander return conveyor.

The Doucet XPRS Return Conveyor’s low cost and smaller footprint make it the perfect choice of small to medium size cabinet makers.

The XPRS Return is specially designed to be used with smaller edgebanders. Its low cost and tiny footprint make it a perfect choice for small to medium size cabinet makers. At last an Edgebander Return that will carry your business to a higher level of profitability, even in a part-time operation.

Why Doucet XPRS Return Conveyor?

  • Available in right or left hand return configuration
  • Features 24″ or 36″ wide receiving modules and return conveyors
  • Standard module length is 60″, return length is proportionate to the length of the edgebander
  • Power requirement is 110 volts – single phase – 15 amps service, no compressed air is required
  • PVC Rollers are individually driven by welded urethane belts
  1. Feed rollers, driven by a variable speed motor, from 0 to 60 ft/min, guide the part onto the receiving module.
  2. A set of top rollers prevents larger panels from tipping down while entering the receiving module.
  3. Polymer belts side-shift the panels to the return rollers quickly and efficiently.
  4. The return rollers are 2″ lower than the pass height of the edgebander, so that parts can travel in opposite directions without interference.
  5. The transfer process occurs on a continuous basis.

CNC Blog Series - Weight

Producing with optimum cut quality, increased production, and superior cutter performance. Choosing the right solution for your shop involves research and understanding which match your production expectations and future goals.

Akhurst Machinery - Blog Post - Dovetail

Once you open the drawer and see the dovetail design, it elevates your product in the consumer’s eye. But why dovetail machine is right for my operation? When deciding to produce your own drawer boxes, a number of factors come into play when selecting the equipment required.

CNC Router

If you want to extend your cutter life, you need to produce an optimum chip load. And to achieve faster feed rates, you need to have axis servo drives large enough to move the machine’s mass at a rapid speed.