CANTEK | ST152C SINGLE END TENONER

Economical solution for cutting tenons for door and window frames.

The Cantek ST152C Single End Tenoner offers superior tenoning results in a economical solution.  The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length.  The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long.  The heads are accurately adjusted using mechanical digital readouts.  The spiral insert heads produce an extremely smooth finish result.  The two opposed coping heads allow for long tenons to pass between to produce a profile to match your rail profile.   The coping heads are also adjusted using precision mechanical counters.

Why Cantek ST152C Single End Tenoner?

  • Industrial cast iron machine frame for vibration free operation
  • (5) working units to produce a wide range of tenons and profiles for door, window components, and furniture parts
  • Accurate adjustment using mechanical digital readouts
  • Spiral insert knife tenon cutterheads with scriber tips for superior tenoning results
  • Opposed coping heads allow for profiling even with long tenons
  • Vertical and horizontal pneumatic workpiece clamping ensures material is secure during tenoning operation
  • Infeed and outfeed safety guards
  • Sliding table rolls on precision machined ” V ” ways allowing for precise and smooth table movement
  • Mechanical stops for precision length cutting
  • Adjustable infeed fence determines stock removal length
  • Dust extraction ports on each working unit
  • Schneider electrical components to CSA standard

Trim Saw

  • 12” dia. driven from tenon heads
  • 1 ¼” shaft diameter x 6″ long
  • 2800 RPM
  • Saw position moved by changing spacers

Tenon Heads

  • Carbide insert spiral tenon heads with scribing inserts
  • 152mm (6”) long x 127mm (5”) diameter tenons heads
  • 5HP motor drives both tenon heads
  • 1 ¼” diameter spindle
  • 3400 RPM
  • 1″ lateral adjustment of tenon heads
  • 14 mm x 14mm x 2mm carbide insert knives (42 knives per head, total 84 knives)

Coping Heads

  • Max. dia. tooling: 6 3/8”
  • (2) 5 HP motors
  • 1 ¼” diameter spindle
  • 6000 RPM
  • 2 ¾” spindle length
  • Independent adjustment each head
  • (2) 4 knife wedge type cutterheads with chip breakers included (60o corrugated knives)
  • Counterbore locknut allows both heads to move close together

Category:
cnc vacuum

When it comes to vacuum, hold down a bigger pump is not necessarily the answer. More important is the design of the vacuum table and how efficient it is at holding small parts during machining operations.

CNC Blog Series - Weight

Producing with optimum cut quality, increased production, and superior cutter performance. Choosing the right solution for your shop involves research and understanding which match your production expectations and future goals.

Akhurst Machinery - Blog Post - Dovetail

Once you open the drawer and see the dovetail design, it elevates your product in the consumer’s eye. But why dovetail machine is right for my operation? When deciding to produce your own drawer boxes, a number of factors come into play when selecting the equipment required.