BI-MATIC Prima Plus 7.3 ONE Programmable Edgebander

BI-MATIC | PRIMA PLUS 7.3 ONE PROGRAMMABLE EDGEBANDER

Reduce costly setup time on your edgebander.

The Bi-Matic Prima 7.3 Plus ONE Programmable Edgebander is an automatic edgebander that allows you to store machine settings for instant recall. With DC servo controls for various functions on the machine setup time is reduced to seconds. Servo controls also mean accurate and repeatable results time after time.

Bi-Matic Prima Plus 7.3 ONE - Product Header

Why Bi-Matic Prima Plus 7.3 ONE Programmable Edgebander?

Store settings for working units allowing for immediate recall and automatic setting according to the desired edge to be applied
Greatly reduce machine setup time and spend more time edgebanding
Quick change glue pot allows for the rapid changing between glue types or colors
Screw glue roller system is capable of applying EVA or Polypropylene glue which has a lower viscosity for virtually invisible joints
The full package for cabinet parts, cabinet doors, and more.

KEY FEATURES

15” touch screen control capable of storing machine settings
Automatic machine adjustments to certain units by servo and pneumatic controls
Auto setting infeed fence according to the edge thickness being applied
Narrow part insertion device to ensure panels are fed squarely into the machine
Dual telescopic panel support to properly support wider pieces during edgebanding operations
5 litre Teflon coated glue pot with quick heating time of 5-6 minutes
Quick change system allows for fast exchange of the glue pot when using different color glues or different glues (when extra glue pot(s) are ordered)
Screw Glue Roller system allows for proper glue delivery of higher viscosity glues like Polypropylene resulting in virtually invisible glue joints
Counter rotating diamond pre-milling cutters to ensure an optimum edge for higher quality joints
Dual motor end trim with pneumatic inclination from the control system
High frequency top & bottom edge trimming units with servo setting
Corner rounding unit for finishing the ends of the panel with pneumatic 2-position dual radius selection from the control panel.
Radius scraping unit with multi radius knives
Glue scraping system to remove any excess glue to eliminate any re-working of the panel
Buffing unit to polish edges after machining
Nesting rollers for proper machining of doors with hinge holes already process
Riepe LPZ/II anti-adhesive spray system prior to pre-milling unit
Riepe LP163/93 polishing system before buffing unit to promote a vibrant edge

SPECIFICATIONS

TECHNICAL DATA		MACHINE DIMENSIONS
Edge thick:	0,4 – 3 mm. / 0.02-0.12”	Length:	4.250 mm / 13.62ft
Min. panel length:	80 mm ca. / 3.15”	Width:	700 mm. / 2.30ft
Min. panel length with Rounding Unit:	130 mm ca. / 5.12”	High:	1.400 mm. / 4.59ft
Installed power:	9 Kw ca.	Weight:	1.100 Kg / 2.430lbs
Min. panel width:	100 mm ca. / 3,94”	Length:	4.250 mm / 13.62ft
Min. panel width with Rounding Unit:	300 mm ca./ 11.81”
Max panel thick with Pre milling:	50 mm ca. / 1.97”	CRATE DIMENSIONS
Max panel thick with Rounding Unit:	50 mm ca. / 1.97”	Length:	4.450 mm / 14.27ft
Max panel thick without Pre milling and Rounding Unit:	50 mm ca. / 1.97”	Width:	900 mm. / 2.95ft
Min panel thick:	10 mm. ca. / 0.39	High:	1.700 mm. / 5.58ft
Working speed:	9 mt/1’ / 29.5 ft/1’	Weight:	300 Kg / 662lbs
Dust outlets:	Nr. 02 Ø 150 mm. / 5.91”
Volt:	230 V / 3 / 60 Hz
Pneumatic Operating Pressure:	6 ATM

Category: Edgebanders

High-end cabinetry, movie stars, Marvel has it all.

Case Study, Corporate, Machinery Solutions, Service and Support

Marvel Cabinetry, from De Winton, AB, is the exclusive cabinetry supplier for the first and second seasons of Property Brothers’ Celebrity IOU on HGTV, and has designed and built made-in-Canada cabinetry for stars across North America. Among them were Michael Bublé, Brad Pitt, Snoop Dogg, Gwyneth Paltrow, Melissa McCarthy, Viola Davis, Jeremy Renner, Kevin Hart, Howie Mandel, and LeAnn Rimes, and Marvel invites you to be next.

Achieving optimum performance from your edgebander.

Service and Support

Edgebanders tend to be one of the more complex machines to operate in a woodworking shop, and their performance has a vital impact on the quality of your finished product. Proper machine setup, maintenance, and cleaning play a major role in achieving the best edgebanding results. Below are some basic tips that can greatly reduce the downtime you experience on your edgebander and keep it producing quality components.

Full line CNC router and storage system double production and decrease lead times.

Case Study, Corporate, Machinery Solutions, Service and Support

Cuisi-n-art, of Gatineau, Quebec, with an eye to the future, undertook a large construction project to double the size of their manufacturing facility and increase their production capacity. The centrepiece of their manufacturing plant expansion was implementing two Anderson Stratos Pro Full-Line CNC Routers and Schelling material storage system.