BENDMAK | PRO 100/120 ANGLE ROLLS

Bend large parts without difficulty with the power of hydraulic cylinders.

The Bendmak PRO 100/120 Angle Rolls are strong and reliable with their St-52 weld construction body. Minimum flexion causes less deformation, by the help of their machines’ enlarged roll diameters. By the help of big measurements of bearings, durability and high bending momentum can be obtained.

The power of hydraulic cylinders enables to bend the larger parts without difficulty. Practical and universal rollers creates the possibility of easiness for bending various sections, and this feature gives the opportunity of being more powerful and robust.

Bendmak Profile Bending Machines are 3 rolls driven. This feature allows to have a possibility to make the high capacity bending processes real. Secondly, our 3 Rolls Driven machine minimizes the slipping of the materials during the bending process. The two bottom rolls are hydraulically driven and they can move independently with each other.

Therefore, in comparison with the machines which are top roll drive, the features of our machines enhance the ability of operators and give the opportunity to make prebending process on both edges. Side supporters can move towards three directions to reduce the deformations and to facilitate bending processes, especially with angles and spirals.

Why Bendmak PRO 100/120 Angle Rolls?

  • Machine body manufactured of St-52 special steel
  • rolls driven by hydraulic motor planetry gearbox and gears
  • Shafts are made of special steel hardened and grounded
  • PRO 100 side guide rolls are manually adjustable
  • PRO 120 side guide rolls are adjustable by hydraulic system
  • Horizontal and vertical working
  • Electrical and hydraulic protections against overloads
  • Digital display for bottom rolls
  • Lower rolls hydraulic moveable up and down
  • Separate and moveable control panel
PRO 120
PRO 100
Size
Diameter
Size
Diameter
ROLLS
Angle leg out
L2x2x3/16 L4x4x3/8 L5x5x1/2
26
43
52
L2x2x1/4
L3-1/2×3-1/2×5/16
L4x4x3/8
28
40
55
AE F F
Angle leg in
L2x2x1/4 L3x3x5/16 L4x4x1/2
26
35
44
L2x2x1/4 L3x3x5/16 L4x4x3/8
32
47
63
AE
T section leg out
WT5
48
WT4
48
A
T section leg in
WT5
48
WT4
40
A
T section leg side
WT5
51
WT4
48
A
Flat hard way
1-1/2×3/8       5×1
20
60
1-1/2×3/8
4×13/16
4×1
16
24
63
AF
Flat easy way
8×2
40
2×3/8
4×1-9/16
7-1/2×1-3/8
16
24
40
AF
Square
3
32
1
2-3/8
16
40
AF
Round
3-3/8
36
1-1/2
2-3/4
16
32
B
Tube
2×0,79
6-1/4×0,157
24
118
2×0,79
5-1/2×0,118
24
118
B
Tube-Pipe
5 SCH40
70
2 SCH40
4 SCH40
16
63
B
Rectangle tube
2×5-1/2×0.196
1-1/2x1x0,078
5-1/2×1-1/2×0,125
23
157
B
Square tube
3-1/2×0.312
2×0.100
4×0,196
20
157
B
Channel easy way – legs out
C8x22.8
40
C7x12,75
32
AD F
Channel easy way – legs in
C8x22.8
47
C7x12,75
32
AD F
Channel hard way
C5x9
315
CB
Beam easy way
W6x20
51
W4x14
50
AD F
Beam easy way
S5x10
98
S7x20 W6x16
40
47
AD F
Beam hard way
S5x14,75
98
S5x14,75
CB
Beam hard way
W4x13 W6x16
102
59
CB
Max. Section Modulus (in3)
4,3 – 7,3
2,7 – 4,9
Power (HP)
20
15
Roll Diameter (inch)
15,35
12,4
Shaft Diameter (inch)
4,72
3,94
Bending Speed (feet/min)
13
18
Weight (lbs)
10.405
4.940
WxLxH (feet)
4,8×6,5×6,7
4,9×5,4×6,9