MU3-D Manual Dovetail Routing Machine with Digital Position Display
Professional level, manually operated dovetail routing machine to rout a single dovetail keyway with each machining cycle.
Heavy cast aluminum construction with large, ergonomically shaped table surface, precision linear bearings, galvanized steel motor carriage with integrated motor fine adjustment.
For Dovetail Key sizes W-0, W-1, W-2, W-3 (W-4 with optional larger motor)
This manually operated dovetail routing machine does not require a compressed air supply. It can be equipped with the optional left and right hand extension tables, a helpful feature especially when processing longer parts.
The keyway location is adjusted by positioning the guided center fence plate on the machine table; the keyway length (routing height) is adjusted by setting a height-stop rod to the desired setting. Both positions are shown on separate digital displays for accuracy and repeatability.
Pulling the main lever downward starts the machining cycle:
Padded hold-down plate secures work-piece and motor is switched on
Continued pulling advances the router head until pre-set height is reached
Releasing the lever returns the motor to its home position and shuts off motor
Padded hold-down plate releases work-piece
With the operator controlling the speed of all machine movements, output is greatly depended on material flow, handling and operator performance.
On its backside, the large heavy-duty cast aluminum machine base has a 2″ diameter dust collection port to connect a shop vacuum for dust free operation.
The supplied router bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes, often times even more. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes.
Hoffmann Dovetail Routing Machine, model MU 3, ready for operation, W-2 solid carbide router bit installed, standard 45 degree center fence plate, center line locator and square stop, motor fine adjustment, covered parts storage, toolkit and manual.
120 volts – 7.4 Amps
885 Watt motor with double front bearing
35,000 rpm at idle
dual liquid crystal display, 3/8” digit size, accurate to 0.004”
Motor carriage guides
20mm diameter guide rods, precision ground
manual– dual action design
Max. height routing
3 3/8” – 85mm / moulding 5 1/8” – 130mm
Dust collection port
2” – 50mm diameter
Installed router bit
W-2, solid carbide
Available router bits
W-0, W-1, W-2, W-3 (W-4 with optional larger motor)
29 1/8” x 25 5/8” x 32 3/4” (without optional table extensions)