CARELL

4RHPBS Series Plate Roll

Features

  • Siemens OP-170 NC Automatic Cycle Controls Standard on all 4RH-PBS Machines
  • Mobile console with low voltage push button controls
  • Top roll and pinch roll driven by radial piston motors direct coupled to shafts for near 100% efficiency
  • Fully hydraulic operation of drop end & tilt of lateral + pinch rolls
  • Lateral roll movement with 75% fewer moving parts than competitors torsion systems means total reliability, lower maintenance and cost savings
  • Pinch pressure adjustable for plate thickness, material type and diameter
  • Pinch roll inclines for cone rolling, solid state controlled
  • Roll rotation on high dynamic load self aligning spherical roller bearings
  • Positive parallel system on pinch and lateral rolls, fully proportional controlled on PBS Series units
  • Oversized low profile end frames for unsurpassed strength at max. loading


OPTIONS

  • Ejectors and auto feeding systems
  • one rolling attachment
  • nduction hardened rolls
  • NC Controls in several configurations
  • verhead and lateral supports
  • Feed Tables

 

Specifications

4RHPBS Model Length Capacity Roll Diameters Power HP Weigh LBS
Bending Rolling Top/Pinch Lateral
R4H 20/3 6’ 1” 1-1/4” 15.4” 13.8” 25 30,580
R4H 25/3 6’ 1-1/4” 1-1/2” 16.5” 14.6” 30 44,880
R4H 30/3 6’ 1-1/2” 1-7/8” 18.1” 16.1” 30 47,080
R4H 35/3 6’ 1-3/4” 2-3/16” 19.7” 17.3” 40 59,400
R4H 40/3 6’ 2” 2-1/2” 21.7” 19.3” 50 77,000
R4H 50/3 6’ 2-1/2” 3” 23.6” 21.3” 75 99,000
R4H 60/3 6’ 3” 3-1/2” 25.6” 23.2” 75 121,000
R4H 20/4 8’ 7/8” 1” 15.4” 13.8” 25 34,980
R4H 25/4 8’ 1” 1-1/4” 16.5” 14.6” 30 50,380
R4H 30/4 8’ 1-1/4” 1-1/2” 18.1” 16.1” 30 53,460
R4H 35/4 8’ 1-1/2” 1-7/8” 19.7” 17.3” 40 67,100
R4H 40/4 8’ 1-3/4” 2-3/16” 21.7” 19.3” 50 85,800
R4H 50/4 8’ 2” 2-1/2” 23.6” 21.3” 75 110,000
R4H 60/4 8’ 2-1/2” 3” 25.6” 23.2” 75 132,880
R4H 70/4 8’ 3” 3-1/2” 28.0” 25.2” 90 150,700
R4H 20/5 10’ 3/4" 15/16” 15.4” 13.8” 25 39,160
R4H 25/5 10’ 7/8” 1” 16.5” 14.6” 30 55,660
R4H 30/5 10’ 1” 1-1/4” 18.1” 16.1” 30 59,840
R4H 35/5 10’ 1-1/4” 1-1/2” 19.7” 17.3” 40 74,800
R4H 40/5 10’ 1-1/2” 1-7/8” 21.7” 19.3” 50 94,600
R4H 50/5 10’ 1-3/4” 2-3/16” 23.6” 21.3” 75 121,000
R4H 60/5 10’ 2” 2-1/2” 25.6” 23.2” 75 145,200
R4H 70/5 10’ 2-1/2” 3” 28.0” 25.2” 90 165,000
R4H 20/7 12’ 1-2” 5/8” 15.4” 13.8” 25 47,740
R4H 25/7 12’ 5/8” 3/4" 16.5” 14.6” 30 66,220
R4H 30/7 12’ ¾” 15/16” 18.1” 16.1” 30 72,600
R4H 35/7 12’ 7/8” 1” 19.7” 17.3” 40 90,200
R4H 40/7 12’ 1” 1-1/4” 21.7” 19.3” 50 112,200
R4H 50/7 12’ 1-1/4” 1-1/2” 23.6” 21.3” 75 143,000
R4H 60/7 12’ 1-1/2” 1-7/8” 25.6” 23.2” 75 169,400
 

Images

Videos